IP Conclusions

This integration project has been a little difficult because most of my team we came from areas as general accounting and chemical analyst, so it was just one of programming.

If we had great help with the courses that we had at the beginning of the semester, but do not say we did not help the matter of algorithmic which helped us practically in most of the project.

By the time our calculator is not in itself complete, but it is planned to finish by Monday or Tuesday, which most feel that we need to improve is the design that takes the calculator as it retains the idea of simple interface with simple colors for the user can use it easily.

Perhaps our calculator does not have the best design and the best programming, but I am glad that our team there is much communication to make jokes, lead or get out to somewhere to relax without any problems.

From my point of view I feel it is important that teams are comprised of members who have good communication and that all members work as one.

Parts, functions and locations

1.-Engine:

Makes the car has motion.

The engine is at the front of the car.

2.-Drive shafts:

Makes the car follow mapped direction. 

The drive shafts is bellow the engine.

3.-Pipeline:

Carries gasoline from the thank to the engine.

The pipeline is bellow the engine, it´s to the right of the drive shafts.  

4.-Exhaust pipe:

It´s used to evacuate the combustion gases from the engine to the outside of the vehicle.

The exhaust pipe is at the top, in the middle of the car.

5.-Silencer:

Makes the car quieter.

The silencer is at the behind of the car.

6.-Brake:

Used to stop the car.

The brake is bellow the fuel tank.

7.-Fuel tank:

Storing fuel for the engine operation 

The fuel tank is at the behind of the car, it´s above the brake.

8.-Fuel gauge:

Maintain control at all times the amount of the fuel available in the fuel tank 

The fuel gauge is in the car,on the dashboard.

Product comparison

Comparing two SOG product catalog:

The PowerAssist has a total of 16 tools, but The POWERLOCK EOD 2.0 V-CUTTER has 18 tools. 
The PowerAssist has v-cutter, but it doesn´t has  scissors
The PowerAssist has Bolt grip channel, but it doesn´t AWL
The PowerAssist is satin color, but it isn't black oxide colour. 
The PowerAssist has small flat screwdriver, but it doesn´t have a Philips screwdriver

Conclude of my comparison:

Is more convenient to buy the POWERLOCK EOD 2.0 V-CUTTER compared the PowerAssist because it contains two tools more, which, these tools are very utilez in daily life.

        POWERLOCK EOD 2.0 V-CUTTER                                        POWERASSIST

Computer Assembly

Disassembled

1. Open the case there are many different ways to open computer cases.
2. Remove the drives, first extracting the floppy disk drive.
3. Lastly extracted our job all the drives cables attached.
4. Remove the ramp by opening the clips that hold the RAM  into the motherboard.
5. Displacing the card is removed then separating it's case Casey That disconnect the microprocessor ion fastening the lever that whole dick leaves.
6. Check the microprocessor by releasing the letter.
7. finally disconnects the base plate, to disconnect it Aires

Reassemble

1. Install the motherboard, secure connecting different kid.
2. Put the new chip in place and install the microporcessor fun.
3. Wireless card to connect internet connection by sliding the casing in place and connect the card to the motherboard .
4. Installing RAM and blocking iran inserting in its slot on the motherboard.
5. connect the hard disk 
6. connect the floppy drive 
7. connect the unit cd-rom 
8. finally close the computer case

diagramas:

Skateboard parts

http://quizlet.com/50882834/skateboard-parts-flash-cards/

Arduino

Arduino is a range of plates.  Arduino hardware platform is an open source, based on a simple plate with inputs and outputs, analog and digital, in a development environment that is based on the programming language Processing. It is a device that connects the physical world with the virtual world, or the analog and digital worlds.

I use arduino for several simple give reasons; It is easy to program, is affordable, is practical, covers little space, is easy to understand.

Arduino has a development environment, where anyone can download it from the official website of arduino, this has versions for Windows and MAC, and the sources to compile in LINUX. 
The Arduino development environment contains a text editor for writing code, a message area, a text console, a toolbar with buttons for common functions, and a series of menus. It connects to the Arduino hardware to upload programs and Communicate with them. 
Writing Sketches 
Software written using Arduino are called sketches. These sketches are written in the text editor. Sketches are saved .ino With the file extension. It has features for cutting / pasting and for searching / Replacing text. The message area Gives feedback while saving and exporting Also errors and displays. The console displays text output by the Arduino environment Including complete messages and other information error. The bottom righthand corner of the window displays the current board and serial port. The toolbar buttons allow you to Verify and upload programs, create, open, and save sketches, and open the serial monitor.

some programming interfaces: 
native USB 
ATMega16U2 via USB 
USB via FTDI 
ATMega8U2 via USB 
FTDI Header support
Arduino offers a variety of different plates which are: 

• boards:

Arduino uno,  Arduino Leonardo,  Arduino Due,  Arduino Yún,  Arduino Tre,  Arduino Micro,  Arduino Robot,  Arduino Explora, Arduino Mega 2560,  Arduino Mini, LilyPad Arduino USB, LilyPad Arduino Simple, LilyPad Arduino SimpleSnap, lilyPad Arduino, Arduino Nano, Arduino Pro Mini, Arduino Pro, Arduino Fio.

• Shields:

Arduino GSM Shield, Arduino Ethernet Shield, Arduino WiFi Shield, Arduino Wireless SD Shield, Arduino USB Host Shield, Arduino Arduino Motor Shield, Arduino Wireless Proto Shield, Arduino Proto Shield. 

• KITS:

The Arduino Starter Kit.

• Accessories:

TFT LCD Screen, USB/Serial Light Adapter, Arduino ISP,  Mini USB/Serial Adapter.

http://www.ethek.com/arduino-que-es-y-para-que-sirve/
http://arduino.cc/en/pmwiki.php?n=Guide/Introduction
http://arduino.cc/en/Main/Products
http://www.sc.ehu.es/sbweb/webcentro/automatica/WebCQMH1/PAGINA%20PRINCIPAL/PLC/ESTRUCTURAS/ESTRUCTURA%20INTERNA/SECCION%20DE%20ES/seccion_de_es.htm
http://multimedia.uoc.edu/blogs/di/es/2012/06/01/cas-destudi-furby-classic/
http://forum.arduino.cc/index.php/topic,105259.0.html

vocabulary

Business Card

Write up

Team # 5 (FIE-RUDOS)
Group Members:

1. Ponce Flores Carlos Andrés 
2. Cisneros Ramírez Abel 
3. Guerrero Orozco David Clemente 
4. Tapia Encino José 
5. Ramirez Gordillo Hugo Yael  

My responsibilities:

My responsibilities in the team will take photos and video in order to have evidence,  collaboration with some colleagues in the program evaluation and logo,  as well as all members of the team to perform and inquire about it to have an investigation of trustfulness. 

I have thought about getting into engineering clubs to have more knowledge than the present and to bring something more to the team.

Scope:

The project document consist of about 20 to 30 leaves, which are plans with a duration of one semester, namely, to be completed in 6 months.

Communication strategies:

o communicate subtle and easy way, using video chat, face time, web pages, voice calls or emails, depending on what is most comfortable in when required

Hello world

University o Colima
My name is Carlos Andrés Ponce Flores
Eng. computer Systems
Hi guys, my name is Carlos Andrés Ponce Flores. I'm a guy that is in a sea of ideas looking for a way in which can carry out.
I was born on april, 20, 1996 in Mexico.
I live with my parents and my two younger brothers, frame and star, we get three years each.
I love music, drawing, exercise and investigate. In the music I like to appreciate and create music on different instruments like the guitar, flute, piano, violin, saxophone, among other instruments that come to cross my path.
In the days of my life I do not like routines, but try to do new things every day, like walking awhile in the streets that never happened or just climb into a truck and see where I come and go see places to appreciate the things that are hard to do with the day to day routine.
I also like working out, muay thai practice earlier but at the moment I am not practicing the best among some other martial art like capoeira or some other fate decide to put in my way.
I am currently pursuing a degree in engineering in computer systems, which, I feel meets my expectations because what I want is to enter the field of research and to enter the Mexican space agency or uk, but that nothing be in a spatial transbordaor.
I will not say that I am kind, nice, smart or any other virtue because you prefer yourself conoscan me and tell me what I am.
I hope everyone you know are my friends and if I get the chance, do my brothers.

Thank you very much for having taken some time to read my blog.